Mount it right the first time.
Tell us what you’re hanging or installing. Mark & Mount turns your measurements into a full-size template you can print, tape up, and use to mark or drill.
Pick your project.
You don’t need to understand coordinates or CAD. Choose the thing in front of you and we’ll ask only for the measurements that matter.
Picture / Frame
One hook, D-rings, sawtooth, wire or cleat.
↗Mirror
D-rings, cleats and mounting clips.
↗TV Mount / Wall Plate
Copy the actual wall-fastener pattern from your mount instructions.
↗Shelf / Bracket
One bracket, two brackets or custom hardware.
↗Cabinet Hardware
Centered pulls, handles and knobs.
↗Bathroom Hardware
Towel bars, holders and robe hooks.
↗Gallery Wall
Advanced: multiple frames in one wall layout.
↗Something Else
Build a custom hole, mark or cutout pattern.
From object to wall in four steps.
Choose your project
Tell us whether you’re mounting a picture, mirror, TV, shelf, cabinet pull or something custom.
Measure the item
Enter the overall size and where each mounting point sits from an edge, the center, or another point.
Print & place
Print the full-size template on normal paper, tape the pages together, position it, then mark or drill through the guide.
Know it’s the right size before you drill.
Every template includes a calibration check. Measure it after printing. If your printer tried to “fit” or shrink the page, you’ll know before the template ever touches your wall.
Open builder and print checkBefore you print.
Mark & Mount does the measuring math. You still choose the correct fastener, anchor, stud, mounting hardware and safe drilling location for your wall and item.
Does the template print at actual size?
Yes. The template is generated using real-world dimensions. Print at 100% or “Actual Size,” then verify the included calibration mark before using it.
What if my template is larger than one sheet of paper?
It is split across multiple Letter or A4 pages with overlap and alignment marks so you can tape the pages together at full size.
Do I need an account?
No. The core template tool works without an account, and your measurements are processed in your browser.
Can I use millimeters instead of inches?
Yes. Switch between inches and millimeters at any time before creating your template.
Does Mark & Mount tell me which anchor or screw to use?
No. Wall construction, item weight and manufacturer requirements vary. Mark & Mount helps you place the mounting points accurately; hardware selection remains up to you.