Cabinet pulls & handles

Make a printable cabinet-hardware drilling template.

For a centered drawer pull or knob, enter the drawer size and hardware spacing and let Mark & Mount calculate the centered holes. For cabinet doors or off-center placement, use the custom option.

What you’ll enter

1For the centered guided option, the drawer width and height.
2For a pull, its center-to-center screw spacing.
3For doors or custom placement, enter the actual hole locations in the custom template.

Turn one careful measurement into a reusable guide.

Cabinet pulls often have standard center-to-center dimensions, but the placement on the door or drawer still has to be right. A printed guide can reduce repeated measuring across matching fronts.

Full-front template

Use the actual door or drawer dimensions when you want the paper edges to align with the cabinet front.

Small reusable guide

For repeated hardware, you can use a smaller custom template that references a top, side, or centerline and contains only the required screw points.

Before drilling an entire set, test the first template on one door or scrap material and verify the physical hole spacing against the hardware.

Ready to mark it on the wall?

Use your actual measurements and print the template at full size.

Create template