Mirrors

Transfer mirror mounting points without the guesswork.

Heavy mirrors are awkward to hold while measuring. Create the mounting pattern on paper first, position the paper, then mark the wall.

What you’ll enter

1The mirror’s outside width and height.
2For two D-rings, each ring’s location from the mirror edges; for a supported cleat, the wall-hole row and spacing.
3For clips, channels, or other systems, use the custom pattern and follow the hardware instructions.

Measure the mirror while it is safely down.

The easiest time to measure a mirror’s mounting hardware is while the mirror is resting securely. Mark & Mount turns those back-side measurements into a full-size guide for the wall.

Use the nearest edge

If the left hanger is easiest to measure from the left edge and the right hanger from the right edge, enter them that way. The tool converts both into the same printable layout.

Check the finished placement

The template shows the outer mirror size along with the mounting points, helping you judge height and centering before drilling.

Always follow the mirror or mounting-system instructions and use hardware appropriate for the mirror’s weight and the actual wall construction.

Ready to mark it on the wall?

Use your actual measurements and print the template at full size.

Create template