Shelves & brackets

Lay out shelf-bracket holes on paper first.

Create a full-size guide for the bracket holes and spacing so you can level and position the layout before drilling.

What you’ll enter

1The shelf width or bracket width.
2For the guided setup, the bracket centerline position and vertical center-to-center hole spacing.
3If the holes are not vertically aligned on the bracket centerline, use the custom template.

Useful when the bracket is harder to hold than the paper.

A metal bracket can be awkward to hold level while marking multiple holes. A paper template lets you set the geometry first and move the whole pattern around the wall until the placement is right.

One bracket or two matching brackets

The guided bracket options are for two vertically aligned holes on the bracket centerline. For slotted plates, offset holes, floating-shelf hardware, or any other pattern, use the custom template and copy the actual fastener locations.

Keep the center visible

The preview and printed guide include centerlines, which can help align the shelf with a wall, cabinet, desk, or other reference point.

Ready to mark it on the wall?

Use your actual measurements and print the template at full size.

Create template