TV wall mounts

Print the TV wall plate’s actual fastener pattern before drilling.

Use the wall plate and your mount manufacturer’s instructions to copy the actual wall-fastener locations into a full-size drilling guide.

What you’ll enter

1The wall plate’s actual width and height.
2Each bolt-hole location from the bracket edges.
3Up to four or more holes, plus any existing holes you want to compare.

A template for the bracket you actually own.

TV mounts vary in wall-plate slots, fastener locations, stud requirements, wall construction, and manufacturer instructions. Instead of relying on a generic pattern, Mark & Mount uses the wall plate and instructions in front of you.

VESA is different: the VESA holes are on the back of the TV and attach the TV to the mount’s TV-side brackets. They are not a universal wall-drilling pattern.

Map the wall fasteners specified by the mount

Add only the wall-fastener locations called for by your mount instructions, measured from the wall plate edges. The PDF keeps those distances at real scale.

Compare with stud or existing-hole locations

You can mark existing holes as a separate point type, making it easier to see whether a new bracket can reuse any prior locations.

The tool only transfers geometry. Verify stud locations, wall structure, hardware, electrical/plumbing hazards, TV height, and manufacturer requirements independently.

Ready to mark it on the wall?

Use your actual measurements and print the template at full size.

Create template